CI-V Test Crack Download


Download —>>>

Download —>>>






CI-V Test Crack (Final 2022)

CI-V Test For Windows 10 Crack provides an easy way to test command sequences (commands that you send to your rig) on an ICOM rigs, so you can make sure you’re sending the right command or you’re typing the right commands. It’s also possible to check if your rig responds with the right response.
You can simply type commands and press ENTER, or you can paste your commands in a file. The program will decode the commands, make sure they are correct and display the results.

The functions of the program are:-
Enter a Command:
– Enter a valid command in hexadecimal (1, 2, 3,…) or as a text sequence (11, 22, 33,…). This command will be sent to the rig. Press ENTER to send the command.
– Input a text sequence containing commands (send xyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxyxy

CI-V Test Crack +

*ICOM [0] Open the connection to the rig.

*ICOM [0] [2] [4] Close the connection to the rig.

*ICOM [1] Enter the OO/BO/IO/XO string.

*ICOM [2] Enter the command string.

*ICOM [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] [26] [27] [28] [29] [30] [31] Press [] key to send the data.

*ICOM [32] [33] [34] [35] [36] [37] [38] [39] [40] [41] [42] [43] [44] [45] [46] [47] [48] [49] [50] [51] [52] [53] [54] [55] [56] [57] [58] [59] [60] [61] [62] [63] [64] [65] Press [] key to send the data.

*ICOM [66] Press [] key to send the data.

*ICOM [67] Press [] key to send the data.

*ICOM [68] Press [] key to send the data.

*ICOM [69] Press [] key to send the data.

*ICOM [70] Press [] key to send the data.

*ICOM [71] Press [] key to send the data.

*ICOM [72] Press [] key to send the data.

*ICOM [73] Press [] key to send the data.

*ICOM [74] Press [] key to send the data.

*ICOM [75] Press [] key to send the data.

*ICOM [76] Press [] key to send the data.

*ICOM [77] Press [

CI-V Test 2022 [New]

R75 is an instrument based on the 80×86 CPU board and is designed to interface with the other more sophisticated AVR based modules.
The R75 connects to the receiver and speakers (via R/C 433-MHz transmitters), and the transmitter can either plug into the same port as the R75 or to an external power supply.
The R75 is programmed via the ATmega16 microcontroller. The ATmega16 provides a USB interface to a PC/Linux which allows software updates to the R75 via a USB dongle.

The R75 provides an interface to the rest of the RBD devices, and allows connection to the receiver and transmitter via the same interface. It also allows RF to be transmitted to the other RBD modules, and vice versa.
R75 Design:

The R75 is based on the ATmega16 microcontroller running a custom version of the Linux kernel. This keeps the memory consumption to an absolute minimum, and the program memory is just a few kilobytes.
The USB interface on the R75 is an FTDI FT232R chip, and the RBD modules are connected to the R75 via the USB interface. The R75 is powered by a micro USB connector, the programming is done using a USB-to-serial converter.
The R75 can be upgraded via its USB interface, for example to replace the ATmega16 with an ATmega32, or to add a realtime clock (RTC) and a pair of EEPROMs to store the program version and the time the R75 was upgraded. The R75 also contains enough EEPROM memory for this purpose.

R75 Commands:

All R75 commands are entered in hex (0 to 7f hex digits), and are sent to the receiver and speakers via RF.
The system is designed to send data via a series of messages, and a command can be made up of multiple messages (as many messages as desired).
For example, the command “842441” can be sent to the receiver (84=R 75(sender), 24=8.4 MHz, 41=the requested frequency) or to the RBD(s) (84=R 75, 24=8.4 MHz, 41=RBD (sender), and finally the RBD number).
In general, commands are made up of a sender number, a frequency (in kHz), and a command number (e.g.

What’s New in the CI-V Test?

ICOM-CI-V Test is a small programm which allows to enter commands directly (in hex) and send them to the rig. Responses are displayed in hex bytes and also in a decoded text format. All ICOM CI-V commands are recognized, including the new R75 commands. This program is not intended to conveniently control your rig, but to test the various commands and their responses!

ICOM-CI-V Test uses a menu system and is written in C language.

1) Press “MENU”, then press “1” to enter the menu.
Press “2” to exit the menu.
2) Press “1”, then select your rig.
Press “2” to exit the menu.
3) Select a command with number buttons “3”, “4”, etc.
Press “4” to exit the menu.

If you have problems with the menu, try to close it by pressing “1”, then “4”, or
“2” if you are not in the menu.

Menu system:
– menu
– do
– end

Button 1:
– rig select
– rig info
– rig read
– rig write
– rig reset

Button 2:
– go to menu
– go to rig
– do if
– end if

Button 3:
– rig up
– rig up good
– rig down
– rig down good
– rig test
– rig test pass
– rig test fail
– rig stop

Button 4:
– rig clear
– rig start
– rig read

System Requirements For CI-V Test:

OS: Windows XP, Windows Vista, Windows 7
Processor: 800Mhz
Memory: 128MB
Graphics: 16MB DirectX 8 or higher
DirectX: Version 8
Processor: 1GHz
Memory: 256MB
Graphics: 32MB DirectX 8 or higher
Storage: 2GB RAM or more
© 2011 Konami Digital Entertainment.
App Released June, 2011.

Lascia un commento

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *